SF-351G is a fluoroelastomer precompound which include copolymer of hexafluoropropylene and vinylidene fluoride, curatives.
Â
It is designed for the bonding seal such as crank shaft seals and valve stem seals.
Â
Features of SF-351G are:
l          Excellent mold release
l          High elongation at break
l          Excellent bonding performance
l          Good mold flow
Â
Recommended Processing Procedures
SF-351G can be compounded with internal mixers or two-roll mills with standard fillers and other ingredients that are used in typical fluoroelastomer formulations. All the dry ingredients should be blended before adding to the rubbery solid. During compounding, full cooling should be accompanied. After mixing, the compound should be cooled as quickly as possible.
 Packing information
SF-351G is packaged with PE film in carton. The weight is 20kg net per carton.
 Safety and handling
l          Store in well ventilated place
l          Smoking is forbidden Strictly in working areas
l          Avoid eye contact
l          Wash thoroughly any contacted skin and clothing After handling.
l          Further safety and handing guide, can follow the productâÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂs Material Safety Data Sheet or consult DowhonâÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂs people.
Â
Typical properties of Vulcanizate
Â
Compound                   PHR      Â
SF-351GÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 100Â Â Â Â Â Â Â Â
MT Black(N990)Â Â Â Â Â Â Â Â Â Â Â Â Â Â 30 Â Â Â Â Â Â Â Â Â
MgOÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 3Â Â Â Â Â Â Â Â Â
Ca(OH)2Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 6Â Â Â Â Â Â Â Â Â
Carnauba Wax                 1        Â
Â
Rheological Properties
177?@ 6min Arc 0.5
Â
ML, lb-In                     1.12        Â
MH, lb-In                     15.52       Â
Ts2, min                      1.15        Â
T10, min                      1.09        Â
T50, min                      1.33        Â
T90, min                      3.42        Â
Â
Physical Properties(ASTM D-412)
Press Cure 180?@5min,
Post Cure 230?@24hour
Â
Hardness?Shore AÂ Â Â Â Â Â Â Â Â Â Â Â Â 76Â Â Â Â Â Â Â Â Â Â
Elongation at Break, %Â Â Â Â Â Â Â Â 300Â Â Â Â Â Â Â Â Â
Tensile?MPa                  13.8       Â
 Compression set % ASTM D395, method B(O-ring)
Â
 200?@70h?                   27         Â