Fluor rubber?FA series?



Fluor rubber?FA series?is the copolymer of Vinylidene Fluoride and Hexafluoropropylene (F26), the appearance of this product is flake and the content of fluorine is 65%.

As one kind of special type rubber, FA series are smellless, innoxious, and non-inflammable (self-extinguish).

After vulcanization, the finish product made of Fluor rubber?FA series?has excellent oil resistance(all kinds of fuel, synthesized oil and lubricant) ,oxidation resistance, chemicals resistance and high temperature & heat resistance (best heat resistance among all the commercialized rubbers), as well as outstanding stability for storage. This product can be molded and extruded to make various kinds of rubber items such as ??ring , seal components, diaphragm, gasket, film, valve plate, hose, rubber covered roller and so on, it is widely used in automobile, petroleum, chemical, instrument, mechanical and aviation and space industries.

Technical index:

Items
FA01
FA02
FA03
FA04
FA05
FA06
FA07
FA08
FA09
FA10

Density g/cm3
1.82
1.82
1.82
1.82
1.82
1.82
1.82
1.82
1.82
1.82

Mooney viscosity, ML?1+10?121?
45
120
145
175
55
65
75
85
25
45

Tensile strength before aging, MPa
-
9
9
9
-
8
8
8
-
-

275? 24H Tensile strength after aging, Mpa
-
9
9
9
-
8
8
8
-
-

Elongation at break before aging %
-
220
220
220
-
200
200
200
-
-

275? 24H elongation at break after aging %
-
220
220
220
-
200
200
200
-
-

2000C, 24H, compressibility 20%, permanent distortion rate %
-
12
12
12
-
18
18
18
-
-

In No.3 jet fuel?2000C, 24H, weight increase (oil-resistance) %
-
5
5
5
-
5
5
5
-
-

Water content %
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5



Note: All the indexes above are the typical values. The tensile strength and elongation at break are no Carbon Black.

Instruction for Packing and stockage:
Fluor rubber?FA01?is in the form of holey flake and sealed in PE bag, packed in the hard paper drums, the net weight is 15kg, then stored in the place of cleanness, cool, and dry.



Fluor rubber?FA02-FA08?is in the form of flake, separated by film and sealed in PE bag, packed in the hard paper drums, the net weight is 20kg, then stored in the place of cleanness, cool, and dry.



Packing and stockpile:
Fluor rubber?FA09?is in the form of chops and sealed in PE bag, packed in the hard paper drums, the net weight is 15kg, then stored in the place of cleanness, cool, and dry.



Packing and stockpile:
Fluor rubber?FA10?is in the form of holey chip and sealed in PE bag, packed in the hard paper drums, the net weight is 15kg, then stored in the place of cleanness, cool, and dry.